SLR Camera Errors
An unknown error code displayed on the camera LCD is the camera driver system advising your there if a failure in the unit.
Most equipment failure error codes are a generic code telling you there is a fault but not what is failing.
You can apply self testing.
| While camera is turned off, remove the lens and clean the body and lens contacts. |
| Try another lens - lenses can also cause errors. |
| Remove the batteries – let stand for 30 seconds then re-fit the batteries. |
| Re-set the camera functions, in the menu of the camera there should be a re-set function. |
| This will re-set the camera back to the manufacture specifications. |
| Check the C/F card pins – you may find a card pins are bent or damaged. |
| Try another card - the card may be faulty. |
| Check your batteries for voltage and current – low batteries can cause a error. |
| If you are using a USB attachment - check the USB lead and connection ports. |
| If it is an error caused via the PC try removing the software and re-installing. |
| If all the above trouble shooting does not eliminate the error you will have to bring/send the unit is for repair/inspection. |
| If your equipment has a power error please send in the battery and charger. |
There are also many universal codes your camera may display. These codes are specific to the failure
| Camera not found |
|
Drivers not found
|
| Shutter error |
| Memory error |
| Device not found |
| Card read error |
| Card read error |
|
Battery low
|