The lens on a compact camera is the major moving assembly and faults/damage can occur.
My lens is failing
|
Lens error displayed on the rear LCD
|
|
If you turn the camera on, it powers up, the lens comes out then retract straight away
|
|
Impact damage - lens slightly bent
|
|
Lens jammed out
|
|
Will not power up
|
|
Lens making a grinding noise
|
|
Sand in the lens assembly
|
Why has my camera lens failed?
There are many reasons why a lens fails.
|
A mechanical failure in the lens assembly
|
|
The auto focus gears may have jammed or broken
|
|
The camera has sustained impact damage
|
|
Sand has penetrated the lens assembly – this will jam the lens gears
|
|
The camera has been accidentally turned on while it is still in the camera case
|
Can this be repaired?
There are generally two different repair processes for a lens repair
|
Dismantle the lens and re-seat the lens assembly
|
|
Dismantle the lens and replace the complete lens assembly - the complete assembly can be costly
|
Note: The auto focus motor in a compact will produce a slight noise, this is because the auto focus in a compact is always working.
The noise you hear from the auto focus motor is normal. In some cameras the auto focus noise may be recorded in movie mode.